System Subsystem - Aktakom ABM-4082 User Manual

6.3.5

SYSTem Subsystem

The SYSTem subsystem contains miscellaneous commands that are summarized in Table 6-5
Command
:SYSTem
:PRESet
:AZERo
:STATe <b>
:STATe?
:BEEPer
[:STATe] <b>
[:STATe]?
:LOCal
:PRESet Command
:PRESet
Command Syntax:
:SYSTem:PRESet
Description:
This command returns the instrument to factory defaults states.
:AZERo Command
:STATe <b>
Command Syntax:
:SYSTem:AZERo:STATe <b>
Command parameter:
<b> = 1 or ON
0 or OFF
Query:
:STATe?
Description:
This command is used to enable or disable autozero. When enabled, accuracy is optimized. When
disabled, speed is increased at the expense of accuracy.
Important Note: Before you can enable or disable autozero, Model DMM must first be in the idle
state.
Table 6-5 SYSTem Command Summary
Function Description
Return to system defaults
Path to set up autozero
Enable or disable atuozero
Query autozero
Path to control beeper
Enable or disable beeper
Query state of beeper
Take multimeter out of remote and restore operation of
front panel (RS232 only)
Enable autozero
Disable autozero
Query state of autozero.
ABM-4082
Default
ON
ON
83