Aktakom ABM-4082 User Manual page 64

ABM-4082
Command
:CALCulate[1]
:FORMat <name>
:FORMat?
:KMATh
:MMFactor <NRf>
:MMFactor?
:MBFactor <NRf>
:MBFactor?
:PERCent <NRf>
:ACQuire
:PERCent?
:STATe <b>
:STATe?
:DATA?
:CALCulate2
:TRACe
:CLEar
:POINts <NRf>
:POINts?
:DATA?
:FORMat <name>
:FORMat?
:STATe <b>
:STATe?
:IMMediate
:IMMediate?
:DATA?
:CALCulate3
:LIMit[1]
:UPPer <n>
:UPPer?
:LOWer <n>
:LOWer?
:STATe <b>
:STATe?
:FAIL?
:CALCulate[1]
64
Table 6-3 CALCulate Command Summary
Function Description
Subsystem to control CALC1:
Select math format (NONE,MXB,PERCent)
Query math format.
Path to configure math calculations:
Set "m" factor for mx+b (-100e6 to 100e6)
Query "m" factor
Set "b" factor for mx+b (-100e6 to 100e6)
Query "b" factor
Set target value for PERCent calculation(-100e6 ~100e6)
Use input signal as target value.
Query percent
Enable or disable KMATh calculation
Query state of KMATh calculation
Read result of KMATh calculation
Subsystem to control CALC2
Clear readings in the buffer.
Specify the size of buffer (2 to 512)
Query buffer size.
Read all readings in the buffer.
Select Math format.
Query math format.
Enable or disable calculation
Query state of math function
Recalculate raw input date in buffer
Perform calculation and read result
Read math result of CALC2
Subsystem to control CALC3 (limit test):
Path to control LIMIT test:
Set upper limit (-100e6 to 100e6).
Query upper limit.
Set lower limit (-100e6 to 100e6).
Query lower limit
Enable or disable limit test
Query state of limit test
Query test result (1=pass, 0=fail)
Default
Parameter
PERCent
1
0
1
NONE
1
-1
OFF