Table of Contents
Advertisement
ABM-4082
4.5.7
Calibration
To make sure the instrument could achieve the designed performance, re-calibration and verification is
required at least once a year. Instrument calibration could be performed either via the calibration menu from
the front panel or through a remote control interface.
The CAL MENU can be used to view the calibration date, to view the number of times calibration has been
performed and to perform calibration. Some of the items are password-protected to prevent accidental or
unauthorized calibration of the multimeter.
Note:
To prevent destroying the calibration data stored in non-volatile memory, only the
authorized service center or qualified individual can do the instrument calibration with
desired equipment.
For a more detailed discussion of calibration procedure, please contact the factory or the authorized
agency.
46
Advertisement
Table of Contents
