Menu Operation - OKIDATA ML590 Service Manual

3.3.04 Menu Operation

General Information
The menu is used to customize the printer's settings and features.
The Menu is made up of a number of Groups.
Each Group has a list of Items.
Each Item has several Settings.
Menu Mode
To place the printer in the Menu Mode, follow this procedure.
Verify that continuous feed paper is installed.
Verify that the ribbon is correctly installed.
Verify that the width of the installed paper matches the paper width menu setting.
CAUTION:
If the Menu is set for wide paper, and narrow paper is used, the printhead will print on the
platen. This could damage / destroy the printhead, platen, and ribbon.
1. Press and hold the
2. The MENU lamp will light. If the printer was selected, the
3. When in Menu Mode, the functions printed below the operator panel switches are active.
4. Press GROUP until the desired Group prints.
5. Press ITEM until the desired Item prints.
6. Press SET until the desired Setting prints.
7. Press EXIT to save the change and exit Menu Mode.
SHIFT switch while pressing the
Service Guide ML590/ML591
Chapter 3 Maintenance & Disassembly
SEL switch.
SELECT lamp will light.
Page: 126