OKIDATA ML590 Service Manual page 190

7. Press GROUP until the desired Group prints (Rear Feed or Bottom Feed).
8. Press ITEM until the desired Item prints (Form Tear Off)
9. Press SET until the desired setting prints (Off, 500 mS, 1 sec, 2 sec).
10. Press EXIT to save the change and exit Menu Mode.
Using
1. Load paper.
2. Press FORM FEED.
3. The paper will advance past the start print position (Top of Form) to the tear bar position.
4. The paper says in this position until the printer receives data. Then, the paper will be retracted
to the appropriate Top of Form position.
5. A few seconds after printing stops, the paper advances to the tear bar position.
Checking Top of Form with Form Tear Off Activated
1. Load paper.
2. Press and hold TEAR.
3. The paper will retract to the Top of Form position.
4. Release TEAR.
5. The paper advances to the tear bar position.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
When you release TEAR, the paper will return to the tear off position.