OKIDATA ML590 Service Manual page 38

Single Feed
Minimum:
Maximum:
Continuous
Non-overlap type
Thickness:
Paper Feed Path:
Printhead Gap
Information:
Labels
Weight:
Width:
Length:
Thickness:
Paper Feed Path:
Printhead Gap
Information:
CAUTION: Use Bottom Feed and/or optional Pull Tractor for card stock and labels.
Transparency
Note: Roller marks may mar the transparency under high temperature/
high humidity conditions.
Weight:
Width:
Length:
Thickness:
Paper Feed Path:
Printhead Gap
Information:
1.7.02 Length
Note: The recommended length is specific to paper type.
Rear Feed
Minimum
Maximum
Bottom Feed
Minimum
Maximum
Top Feed
Minimum
Maximum
1.7.03 Number of Copies
Original + 4 Interleaf
Original + 4 Carbonless
Original Cut Sheet
1.7.04 Thickness
0.014 inches / 0.36 mm Maximum Thickness, Rear Feed
0.017 inches / 0.44 mm Maximum Thickness, Bottom Feed
1.7.05 Weight
6.5 x 3.6 inches (16.5 x 9.1 centimeters)
9.5 x 4.1 inches (24.1 x 10.4 centimeters)
.014 inches (.325 millimeters)
Bottom
Refer to the Printhead Gap Information, Section 1.6. .
N/A
Microline 590 3.5 to 10.5 inches (8.8 to 26.6 centimeters)
Microline 591 3.5 to 16.5 inches (8.8 to 41.9 centimeters)
3 to 17 inches (7.62 to 43.18 centimeters)
.011 inches (0.28 mm) Maximum (including backing)
Bottom
Refer to the Printhead Gap Information, Section 1.6.
12 to 24 lbs. (45 to 90 g/m2)
Microline 590 7.2 to 8.5 inches (18.2 to 21.5 centimeters)
Microline 591 7.2 to 14.3 inches (18.2 to 36.3 centimeters)
3 to 17 inches (7.62 to 43.18 centimeters)
0.14 inches (0.36 millimeters)
Top
Refer to the Printhead Gap Information, Section 1.6. .
3 inches (7.62 centimeters)
17 inches (43.18 centimeters)
3 inches (7.62 centimeters)
17 inches (43.18 centimeters)
3 inches (7.62 centimeters)
17 inches (43.18 centimeters)
Maximum
.