Idle Gear And Change Lever - OKIDATA ML590 Service Manual

3.2.23 Idle Gear and Change Lever

1. Perform these procedures:
3.2.01
3.2.06
3.2.07
3.2.16
3.2.17
3.2.19
3.2.20
3.2.22
2. Remove the idle gear (1). The idle gear is a large narrow gear.
3. Release the claw (2) of the change lever (3). The claw is accessed from inside the unit.
4. Remove the change lever.
Service Guide ML590/ML591
Chapter 3 Maintenance & Disassembly
Page: 115