Table of Contents
Advertisement
Page: 56
Service Guide ML590/ML591
Chapter 2 Principles of Operation
Gap Adjust Control
The Gap Adjust LSI receives stroke length information for all of the printhead pins from the sensor
analog circuit. The Gap Adjust LSI then sets the optimum printhead gap for the printing medium.
Note:
Refer to Section 2.2.03
for a description of the mechanical process.
All values in the chart are in millimeters
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
- Quick Links:
- Pull Tractor Kit
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
