OKIDATA ML590 Service Manual page 196

Contact of Space Motor Assembly Gear
and Space Rack
Contact between Platen Shaft and
Platen Ground Spring
Contact between Bias Gear and Platen
Gear
Bearing of Change Lever
Bearing and Pivot Point of Change Lever
Pivot Point of Release Cam
Holders on Pressure Spring
Bearing of Front Release Gear Arm
Carriage Shaft NOTE: <_><_>Place a
small amount on the surface then wipe
clean.
Front Release Gear Shaft
Contact between Front Roller Holder and
Front Pressure Roller
Bearing of Tractor Gear
Contact between Lower Tractor Feed
Shaft and Main Frame
3.5.06 Areas Not Lubricated
Lubricant should never contact the parts listed below.
Ribbon
Platen Assembly (Rubber Face)
Pressure Roller (Rubber Face)
Tractor Pins
Oil
3.2.11
Grease
3.2.19
Oil
3.2.19
Grease
3.2.23
Grease
3.2.23
Grease
3.2.24
Grease
3.2.24
Grease
3.2.24
Oil
3.2.25
Grease
3.2.27
Oil
3.2.28
Grease
3.2.29
Grease
3.2.29
Small
Small
Small
Medium
Medium
Medium
Medium
Medium
See
NOTE
Medium
Small
Medium
Medium