Roller/Holder Backup Assembly - OKIDATA ML590 Service Manual

3.2.14 Roller/Holder Backup Assembly

1. Perform these procedures:
3.2.01
3.2.02
3.2.04
3.2.11
2. Use a small straight slot screwdriver to disengage the claws of the backup roller holder spring
(1) from the carriage frame (2).
3. Remove the roller/holder backup assembly (3).
NOTE:
The roller/holder backup assembly includes the backup roller (4), the backup roller holder (5), and
the pin (6).
P/N 53343201 Assembly: Roller/Holder Backup
P/N 53341701 Roller: Back Up
P/N 53341801 Holder: Back Up Roller
P/N N/A` Pin
P/N N/A Backup Roller Holder Spring
Service Guide ML590/ML591
Chapter 3 Maintenance & Disassembly
Both
RSPL Both
RSPL Both
Both
Both B.2.06
B.2.06
B.2.06
B.2.06
B.2.06
Page: 106