Paper Specifications - OKIDATA ML590 Service Manual

1.7

PAPER SPECIFICATIONS

CAUTION: Use Bottom Feed and/or optional Pull Tractor for card stock and labels.
1.7.01 Types
Card Stock
Weight:
Width:
Length:
Thickness:
Paper Feed Path:
Printhead Gap
Information:
Continuous Form
Weight:
Single Part
Multi-Part
Carbonless
Multi-Part,
Interleaf
Paper
Width:
Length:
Thickness:
Paper Feed Path:
Printhead Gap
Information:
Cut Sheet
Weight:
Width:
Width:
Length:
Thickness:
Paper Feed Path:
Printhead Gap
Information:
Envelopes
Weight:
Size:
120 lbs. (450 g/m2)
Microline 590
Microline 591
3 to 17 inches (7.62 to 43.18 centimeters)
.017 inches (0.44 millimeters)
Bottom
Refer to the Printhead Gap Information, Section 1.6 .
12 - 24 lb. (45 to 90 g/m2)
9 - 11 lb. (35 to 40 g/m2)
10 - 12 lb. (38 to 45 g/m2) Carbon
Microline 590
Microline 591
3 to 17 inches (7.62 to 43.18 centimeters)
0.014 inches (0.36 millimeters) Rear Feed
0.017 inches (0.44 millimeters) Bottom Feed
Rear or Bottom
Refer to the Printhead Gap Information, Section 1.6
12 to 24 lbs. (45 to 90 g/m2)
7.2 to 14.3 inches (18.3 to 36.3 centimeters)
Microline 590
Microline 591
3 to 17 inches (7.62 to 43.18 centimeters)
0.014 inches (0.325 millimeters) Maximum
Top
Refer to the Printhead Gap Information, Section 1.6.
24 lbs. (90 g/m2)
Service Guide ML590/ML591
Chapter 1 Product Specifications
Maximum
5 to 8 inches (12.7 to 20.3 centimeters)
5 to 14 inches (12.7 to 35.6 centimeters)
3.5 to 10.5 inches (8.8 to 26.6 centimeters)
3.5 to 16.5 inches (8.8 to 41.9 centimeters)
7.2 to 8.5 inches (18.2 to 21.5 centimeters)
7.2 to 14.3 inches (18.2 to 36.3 centimeters)
Maximum
9 lb. (35 g/m2)
.
Page: 30