Guide Rail And Adjust Cam - OKIDATA ML590 Service Manual

3.2.15 Guide Rail and Adjust Cam

1. Perform these procedures:
3.2.01
3.2.02
3.2.04
3.2.11
3.2.14
2. Rotate the adjust cam (1) in the direction of arrow A as far as possible.
3. Pull the cam out and remove it.
4. Carefully press the claw (2 location only) in the base frame down to release the guide rail (3).
Do not press too hard or the claw will break.
5. Use a straight slot screwdriver to slide the guide rail in direction of arrow A.
6. Lift the guide at position B and work the other end of the guide free to remove the guide rail.
7. Remove the ground clip (4)
Service Guide ML590/ML591
Chapter 3 Maintenance & Disassembly
Page: 107