Paper Chute Assembly - OKIDATA ML590 Service Manual

3.2.20 Paper Chute Assembly

1. Perform these procedures:
3.2.01
3.2.06
3.2.19
2. Remove the rear pressure roller (1).
3. Use a straight slot screwdriver to release the claws of the lock spring (2) and remove the
spring.
4. Remove the paper chute assembly (3).
NOTE:
The paper chute assembly includes the levers for the rear and top paper feed paths.
P/N 53341301 Roller: Pressure Rear (Narrow)
Service Guide ML590/ML591
Chapter 3 Maintenance & Disassembly
RSPL 590 B.2.05
Page: 112