Carriage Shaft - OKIDATA ML590 Service Manual

3.2.25 Carriage Shaft

CAUTION
The space motor assembly, etc. may be left in place when removing the carriage shaft. However,
use extra care when doing so.
The carriage cable should be detached from the space motor before removing the carriage shaft.
1. Perform these procedures:
3.2.01
3.2.06
3.2.07
3.2.16
2. Push the end (A) of the carriage shaft (1) until it clears the base frame.
3. Pull the carriage shaft free of the base frame.
4. Remove the support protect reset spring (2).
5. Remove the support protector assembly (3).
6. Remove the frame set carriage (4).
Service Guide ML590/ML591
Chapter 3 Maintenance & Disassembly
Page: 117