Ribbon Protector - OKIDATA ML590 Service Manual

3.2.03 Ribbon Protector

CAUTION
You MUST use a straight slot screwdriver to release the ribbon protector. If you attempt to
lift the protector without releasing the tabs, the protector will break.
1. Perform these procedures:
3.2.01
3.2.02
2. Open the pull-up roller cover (1).
3. Use a straight-slot screwdriver to release the extensions (2) from the carriage frame set (3).
4. Lift the ribbon protector (4) straight up and remove it.
P/N 53562801 Protector: Ribbon
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide ML590/ML591
Chapter 3 Maintenance & Disassembly
RSPL Both B.2.06
Page: 95