Platen Assembly - OKIDATA ML590 Service Manual

3.2.19 Platen Assembly

1. Perform these procedures:
3.2.01
3.2.06
2. Move the change lever (1) to the bottom feed position (to the rear of the printer).
3. Push the lock levers (2) in, then rotate them towards the front to unlock them from the frame.
4. The levers should be vertical.
5. Lift the platen assembly (3) straight up and remove it.
NOTE:
Installation
Service Guide ML590/ML591
Chapter 3 Maintenance & Disassembly
Page: 111