Pressure Spring - OKIDATA ML590 Service Manual

3.2.24 Pressure Spring

1. Perform these procedures:
3.2.01
3.2.06
3.2.07
3.2.16
3.2.17
3.2.19
3.2.20
3.2.22
3.2.23
2. Turn the front release gear arm (1) until it is disengaged.
3. Remove the release cam (2). This is the medium size, thick cam.
4. Work the end of the pressure spring (3) free and remove the spring.
5. Remove the front release gear arm. This arm is long, with a serrated edge.
6. Remove the switch lever (4). This is the small lever.
Service Guide ML590/ML591
Chapter 3 Maintenance & Disassembly
Page: 116