Printer Tests; Rolling Ascii Test; Font Test; Serial Interface Loopback Test - OKIDATA ML590 Service Manual

4.8

PRINTER TESTS

4.8.01 General Information
This section covers the tests listed below.

1. Rolling ASCII Test

2. Font Test

3. Serial Interface Loopback Test

4. Hexadecimal Dump Mode
5. The Rolling ASCII and Font Tests check print operations.
6. The Serial Interface Loopback Test checks the operation of the serial interface board.
7. The Hexadecimal Dump Mode checks the data transfer between the computer and
printer.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide ML590/ML591
Chapter 4 Failure & Repair Analysis
Page: 170