Bottom Paper Sensor Levers - OKIDATA ML590 Service Manual

3.2.27 Bottom Paper Sensor Levers

1. Perform these procedures:
3.2.01
3.2.06
3.2.07
3.2.16
3.2.17
3.2.19
3.2.20
3.2.22
3.2.23
3.2.24
2. Working from the underside of the unit, release the claws of the paper pan (1). When you
release a claw, push on the claw to move the paper pan away from the main frame.
3. Remove the pan.
4. Rotate the bottom sensor lever (2) until the flag is at the top. Then, lift the lever and work it free
of the frame to remove it. This lever has a box end.
5. Remove the bottom paper end lever (3).
6. Work the front release gear shaft (4) free of the tabs and remove it.
Service Guide ML590/ML591
Chapter 3 Maintenance & Disassembly
Page: 119