OKIDATA ML590 Service Manual page 159

NOTE:
Installation
After installing the carriage shaft, check the printhead gap adjustment.
this Service Handbook.
Cleaning
When cleaning, refer to Section 3.4 of this Service Handbook.
Lubrication
When lubricating, refer to Section 3.5 of this Service Handbook.
P/N 50098901 Carriage: Frame Set
P/N 50923601 Spring: Support Protect Reset
P/N 53067601 Protector: Support (Assembly)
P/N 53563501 Shaft: Carriage (Narrow)
P/N 53563502 Shaft: Carriage (Wide)
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Refer to Section 3.3 of
RSPL Both B.2.06
RSPL Both B.2.03
RSPL Both B.2.03
RSPL 590
RSPL 591 B.2.03
B.2.03