Maintenance & Disassembly - OKIDATA ML590 Service Manual

Page: 89
Service Guide ML590/ML591
Chapter 3 Maintenance & Disassembly
3.1.01 General Information
This section lists the parts replacement, adjustment, cleaning, lubrication, and shipping
procedures.
Disassembly should not be performed unless absolutely necessary. NEVER perform disassembly
on a malfunctioning printer until you have followed the failure analysis procedures in Section Four
of this Service Handbook.
Follow the procedures listed in Adjustments and Service Settings. Adjustments may be required
when either consumable or parts are replaced. Failure to perform these procedures could result in
unnecessary service calls.
Proper performance of maintenance and cleaning will help to achieve the best possible print
quality from the printer.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)