Menu Operation - OKIDATA Pacemark 3410 Service Manual

Page: 70
Service Guide PM3410
Chapter 3 Maintenance & Disassembly

3.3.04 Menu Operation

General Description
The Menu is used to customize the printers settings and features.
The Menu is made up of a number of groups.
Each group has a list of items.
Each item has several settings.
Menu Mode
To enter Menu Mode, follow this procedure.
1. Verify that continuous feed paper is installed.
2. Verify that the ribbon is correctly installed.
3. Verify that the width of the installed paper matches the paper width menu setting.
4. Press PRINT QUALITY and CHARACTER PITCH at the same time to place the printer in Menu Mode.
When in Menu Mode, the functions printed below the operator panels switches are active.
5. Press GROUP until the desired Group prints.
6. Press ITEM until the desired Item prints.
7. Press SET until the desired setting prints.
8. Press EXIT to save the change and exit Menu Mode.
Printing the Menu
Printing the Menu provides a reference of current settings.
This will help you move through the menu.
Okidata STRONGLY RECOMMENDS printing the Menu before resetting the Menu to factory defaults.
To print the Menu, follow this procedure.
1. Verify that continuous feed paper is installed.
2. Verify that the ribbon is correctly installed.
3. Verify that the width of the installed paper matches the paper width menu setting.
4. Power ON the printer.
5. Press and hold PRINT QUALITY and CHARACTER PITCH at the same time to place the printer in
Menu Mode.
When in Menu Mode, the functions printed below the operator panels switches are active.
6. Press PRINT.
7. The Menu will print.
8. Press EXIT to exit Menu Mode.