Removing A Hot-Swappable Power Supply - HP Integrity cx2600 Maintenance Manual

NOTE: A hot-swappable device does not require interaction with the operating system before
the device is removed from or installed into the server. If the second power supply is functioning
correctly, you can power off and remove a power supply with no effect on server operations.
The power to the server (other power supply) does not have to be off to remove or replace a
hot-swappable power supply.
Figure 7-4 Hot-Swappable Power Supply
chaspsxtnd
Power Power
Supply 1 Supply 2

Removing a Hot-Swappable Power Supply

A power supply can be removed while the server is installed in a rack, with the server operating
normally. Removal of a power supply will have no effect on operations if the other supply is
functioning correctly. To remove a hot-swap power supply, perform the following steps:
Removing and Replacing Hot-Swappable Power Supplies 119