Removing Protective Tape, Packing And Other Shipping Materials - Konica Minolta BIZHUB 367 Installation Manual

6. Installing the main body and the Paper
Feed Cabinet (or the Desk)
(1) Take the main body and the Paper Feed Cabinet
(or the Desk) out from its packaging.
Caution:
Main body mass: 56.5 kg (124-9/16 lb)
Make available collective manpower of an appro-
priate size for transporting the main body.
Note:
Remove the main body, holding it by the locations
on the left side and the handles on the right side
as shown in the illustration and keeping it level.
When holding the transportation handles,
be careful not to catch your fingers in the
machine.
(2) Refer to the installation manual for the Paper
Feed Cabinet (or the Desk) and follow the
"Installation Procedures."
Note:
If installing the Heater HT-509 and the Power Sup-
ply BOX MK-734, install them at the same time as
the installation of the Paper Feed Cabinet (or the
Desk).
7. Removing protective tape, packing and
other shipping materials
(1) Remove the protective tape and the protective
materials.
E-3