Selectable Boot Settings Menu Option - IBM DS3000 Introduction And Implementation Manual

Draft Document for Review August 30, 2007 12:59 am
Figure 21-23 Selectable Boot Settings menu option
Selectable Boot Settings
The
1. In the Selectable Boot Settings menu, make sure the
Enabled.
2. Move the cursor to
DS3400 entry as the boot device. The controller A FC host port WWN should appear and
LUN should be 0 (see Figure 21-24).
menu displays. You need to do the following now:
(Primary) Boot Port Name, Lun
Chapter 21. FC configuration 3 - Linux SAN boot with System x 3755
7065FC_Config3.fm
Selectable Boot
field is set to
field and press Enter. Now select the
513