Add Storage Subsystem With Reconfigured Ip Addresses - IBM DS3000 Introduction And Implementation Manual

Draft Document for Review August 30, 2007 12:59 am
Figure 4-57 Remove the subsystem
We changed the controller IP addresses to these values:
172.18.4.1 on controller A
172.18.4.2 on controller B
Now let's add the subsystem with these IP addresses, as shown in Figure 4-58 on page 91.
Figure 4-58 Add Storage Subsystem with reconfigured IP addresses
The DS3000 will be added to the Enterprise Management window using the new IP
addresses.
This completes the basic configuration of DS3000 storage subsystem.
7065DS3KBasicConfig.fm
Chapter 4. Basic configuration
91