IBM DS3000 Introduction And Implementation Manual page 254

7065Admin_Modify.fm
Figure 10-13 Edit Topology - Delete logical drive
Important: Before deleting a logical drive consider the following:
Deleting a logical drive causes loss of all data on the logical drive. Back up the data and
stop all I/O before performing this operation if necessary.
If you delete an array, all logical drives associated with the array will be deleted. If you
delete the last remaining logical drive in an array, the array will be deleted.
If a file system is mounted on the logical drive, unmount it before attempting to delete it.
Deleting a base logical drive automatically deletes any associated FlashCopy logical
drives and FlashCopy repository logical drives
Deleting a FlashCopy logical drive automatically deletes the associated FlashCopy
Repository logical drive.
After you click Delete a warning will appear(Figure 10-14 on page 223). To continue, type yes
in the prompted box and click OK.
222
IBM System Storage DS3000: Introduction and Implementation Guide
Draft Document for Review August 30, 2007 12:59 am