Locate The Storage Subsystem; Initial Setup Tasks - IBM DS3000 Introduction And Implementation Manual

Draft Document for Review August 30, 2007 12:59 am
Figure 4-21 Initial Setup Tasks
The wizard is basically a set of shortcuts to the listed tasks.

4.4.1 Locate the storage subsystem

When you select this task, a window in the subsystem management window similar to
Figure 4-22 displays. Use this option to locate a particular DS3000 within a rack full of other
equipment (host servers, storage subsystems, LAN and SAN switches etc.). You can locate a
DS3000 subsystem, a particular controller, or an EXP3000 enclosure.
7065DS3KBasicConfig.fm
Chapter 4. Basic configuration
61