Select Existing Host Group; Configure Host Access Complete - IBM DS3000 Introduction And Implementation Manual

7065Admin_Configure.fm
Figure 8-27 Select existing host group
13.Click Next to show a summary of the host to be defined, similar to Figure 8-25 on
page 150. Review the information and click Finish to save your configuration changes.
The host is now defined (Figure 8-28).
Figure 8-28 Configure Host Access Complete
Now you are done with the first host, repeat these steps for other unconfigured host that will
access the system. Click Yes to restart the wizard or click No to return to the Configure tab.
152
IBM System Storage DS3000: Introduction and Implementation Guide
Draft Document for Review August 30, 2007 12:59 am