Configure Storage Subsystem - Manual - IBM DS3000 Introduction And Implementation Manual

System storage

Hide thumbs Also See for DS3000:

Table of Contents

Draft Document for Review August 30, 2007 12:59 am

Figure 4-42 Configure Storage Subsystem - Manual

The manual configuration task consists of two parts:

Step 1: Configure Hot Spare Drives

Step 2: Create Logical Drives

Configure Hot Spare Drives

This is a shortcut to the automatic hot spares configuration applet. You cannot select the

number or position of hot spare drives, the process is completely automatic. Storage Manager

assigns the appropriate number of hot spare drives to provide optimal coverage for all

physical disks. Figure 4-43 shows the automatic hot spares configuration window.

7065DS3KBasicConfig.fm

Chapter 4. Basic configuration

Show Quick Links

Table of Contents