Chapter 8. Administration - Configure - IBM DS3000 Introduction And Implementation Manual

Draft Document for Review August 30, 2007 12:59 am
Administration - Configure
Chapter 8.
This chapter describes the Configure tab of the IBM System Storage DS3000 Storage
Manager. On this tab you can configure a DS3000 storage subsystem, including functions for
creating hosts, arrays/logical drives and mapping them together, so that the host can access
the storage subsystem.
You can use the Subsystem Management Configure tab to:
Configure hosts automatically or manually
Create host groups
Configure the storage with arrays and logical drives
Create FlashCopy Logical Drives
Create Logical Drive Copies
Create Host-to-Logical Drive Mappings
© Copyright IBM Corp. 2007. All rights reserved.
7065Admin_Configure.fm
8
135