Configure Host Access (Automatic); Automatic Host Configuration Is Complete - IBM DS3000 Introduction And Implementation Manual

7065SAS_Config1.fm
Figure 14-10 Configure Host Access (Automatic)
3. Click Add to place the host in the
the automatic host configuration. Figure 14-11 confirms that our configuration was
successful.
Figure 14-11 Automatic host configuration is complete
4. Let's verify the host server definition. We expect to see two HBA host ports, as the server
contains two SAS HBAs.
We use the
COLORADO definition indeed contains two SAS HBA host ports, with their identifiers.
SAS HBAs use
326
IBM System Storage DS3000: Introduction and Implementation Guide
Selected Hosts
Edit Topology
task. As you can see in Figure 14-12, the host server
Physical SAS addresses
Draft Document for Review August 30, 2007 12:59 am
window, then click OK. This completes
as HBA identifiers.