7065FC_Config3.fm
Figure 21-19 Logical drive creation complete
21.4.3 Logical drive ownership
The host server can only talk to controller A at this point. This means controller A must be the
preferred and current owner of the logical drive named SAN_boot_Linux. To verify this, use
the Change Logical Drive Ownership/Preferred Path task in the Modify tab. As shown in
Figure 21-20, our logical drive is currently owned by controller B, which is also the preferred
controller. Click Change to reset it to controller A.
510
IBM System Storage DS3000: Introduction and Implementation Guide
Draft Document for Review August 30, 2007 12:59 am