Installation Type; Select Product Features - IBM DS3000 Introduction And Implementation Manual

7065InstallSM.fm
Figure 5-17 Installation type
8. In Figure 5-18 on page 104, select the Install Set to be chosen - Management Station, in
our case. You will then see which Storage Manager components will be included. Click
Next.
Figure 5-18 Select product features
9. If a version of Storage Manager is already installed, you will see the warning in
Figure 5-19. You can select to over-write the existing installation or to cancel at this point.
If you do not have Storage Manager already installed, you do not see this warning. Click
OK to remove the old version and proceed with the installation.
104
IBM System Storage DS3000: Introduction and Implementation Guide
Draft Document for Review August 30, 2007 12:59 am