Install Windows Server 2003; Install The Iscsi Hba Driver - IBM DS3000 Introduction And Implementation Manual

Draft Document for Review August 30, 2007 12:59 am
Device
System Storage
DS3300
iSNS

16.2 Install Windows Server 2003

Follow the operating system installation instructions that are available for each IBM
BladeCenter blade and System x server. The installation guides can be found in the
"Install/use" section of each product's support web sites.
For our IBM BladeCenter HS21 (8853) with Microsoft Windows Server 2003, we used the
instructions shown in
http://www-304.ibm.com/jct01004c/systems/support/supportsite.wss/docdisplay?lndoci
d=MIGR-66309&brandind=5000020.

16.3 Install the iSCSI HBA driver

The Microsoft Windows Server 2003 installed does not include the device drive for the QLogic
iSCSI HBA. In this section we will show how to install this driver.
Description
iSCSI HBA 1 - NIC
Port 0
iSCSI HBA 1 - NIC
Port 1
iSCSI HBA 1 -iSCSI
Port 0
iSCSI HBA 1 -iSCSI
Port 1
Controller A - Mgt.
Controller A - iSCSI
Port 1
Controller A - iSCSI
Port 2
Controller B - Mgt.
Controller B- iSCSI
Port 1
Controller B - iSCSI
Port 2
Service IP
Chapter 16. iSCSI configuration 1 - Windows 2003 with QLogic QMC4052 HBA
7065iSCSI_Config1.fm
Value Comments
172.16.200.62/16
172.17.200.62/16
172.16.200.63/16
172.17.200.63/16
172.18.3.1/16 Management LAN
172.16.3.1/16 iSCSI LAN 1
172.17.3.1/16 iSCSI LAN 2
172.18.3.2/16 Management LAN
172.16.3.2/16 iSCSI LAN 1
172.17.3.2/16 iSCSI LAN 2
172.18.0.9/16 Management LAN
343