Install Sansurfer - IBM DS3000 Introduction And Implementation Manual

7065iSCSI_Config1.fm

16.4 Install SANsurfer

QLogic SANsurfer is a client-server based management application for QLogic Fibre Channel
and iSCSI HBAs as well as QLogic Fibre Channel Switches. Only one client is required - this
can be installed either on a separate management station or on one of the hosts with an HBA
installed. Every host with an HBA installed requires an agent to communicate with the client
and the installed HBA drivers.
There are different SANsurfer packages available that provide support for the various Fibre
Channel devices. Here, since we are only using the iSCSI HBA, we will download the
package that contains only iSCSI support.
1. Download SANsurfer from
http://support.qlogic.com/support/oem_detail_all.asp?oemid=369.
2. Execute the self-extracting archive package
iSCSI_SANsurfer_4_03_17_windows_package.exe. Click Open to start the execution, as
in Figure 16-9 on page 348.
Figure 16-9 File Download - Open
3. Click Unzip to extract the content of the archive into the suggested location
(Figure 16-10). The setup will start automatically after extraction is complete.
Figure 16-10 WinZip Self-extractor
4. Click OK to confirm that all files are extracted, Figure 16-11.
Figure 16-11 WinZip complete
348
IBM System Storage DS3000: Introduction and Implementation Guide
Draft Document for Review August 30, 2007 12:59 am