Create New Cluster; New Server Cluster Wizard; Cluster Name And Domain - IBM DS3000 Introduction And Implementation Manual

7065iSCSI_Config3.fm
Figure 18-39 Create new cluster
3. The New Server Cluster wizard starts, as inFigure 18-40. Click Next.
Figure 18-40 New server cluster wizard
4. Enter the name for your cluster and click Next. The domain is detected automatically. See
Figure 18-41.
Figure 18-41 Cluster name and domain
5. In Figure 18-42 on page 427, enter the name of the computer where the cluster service
needs to be installed. This is only required when the cluster administrator is running on a
management station system and not directly on the first cluster node. The server cluster
wizard will add the local host name already in this dialog. Click Next.
426
IBM System Storage DS3000: Introduction and Implementation Guide
Draft Document for Review August 30, 2007 12:59 am