Select Capacity Type - IBM DS3000 Introduction And Implementation Manual

7065FC_Config3.fm
Draft Document for Review August 30, 2007 12:59 am
2. Select the capacity type, as shown in Figure 21-14.
Figure 21-14 Select Capacity Type
3. We will use two unassigned disk drives to create a new array. Therefore, we select
Unconfigured capacity: create a new array and logical drive.
4. In Figure 21-15, there are two drive selection choices. We select Automatic.
505
Chapter 21. FC configuration 3 - Linux SAN boot with System x 3755