Chapter 18. Iscsi Configuration 3 - Windows 2003 Cluster - IBM DS3000 Introduction And Implementation Manual

Draft Document for Review August 30, 2007 12:59 am
iSCSI configuration 3 - Windows
Chapter 18.
2003 Cluster
This sample configuration shows how to connect logical drives configured on an IBM System
Storage DS3000 to clustered servers running Windows Server 2003 operating system with
the Microsoft iSCSI Software initiator installed.
The server is an IBM System x 3850 running VMware 3.1. At the time of writing, native
failover support with the DS33000 is not available, therefore we use the iSCSI software
initiator, along with the DS3000 failover driver.
Our cluster will consist of two virtual machines, hostname mara and ora.
Figure 18-1 on page 404 gives the cabling and networking details of the configuration.
© Copyright IBM Corp. 2007. All rights reserved.
7065iSCSI_Config3.fm
18
403