Install Ds3000 Storage Manager On Microsoft Windows; Installation Preparation; Install Or Upgrade Storage Manager On Microsoft Windows - IBM DS3000 Introduction And Implementation Manual

7065InstallSM.fm

5.1 Install DS3000 Storage Manager on Microsoft Windows

This section describes how to install DS3000 Storage Manager on a Windows system.
Depending on the usage of the system, different components need to be installed, as
described in 2.3.1, "DS3000 Storage Manager components" on page 20.
Note: Microsoft hot fix KB916048 must be installed first before the RDAC component can
be installed. This fix is available from http://support.microsoft.com/?kbid=916048.

5.1.1 Installation preparation

1. Download the Storage Manager installation package, from the IBM Support Web site. You
will see a 32-bit (x86) and 64-bit (x86-64) version - make sure to download the package
corresponding to the Windows version of the host or management station. For more
details about how to download DS3000 fixes, code, and documentation, see Appendix B,
"IBM Support Web site" on page 533.
2. Unpack the ZIP archive into a local directory. The ZIP archive contains:
– a README file with information about the package and the installation
– a change history of the package
– the installer file - of format SMIA-WS<32|64>-xx.xx.xx.xx.exe - where the x's represent
the version information
– a subdirectory with MIB files
3. Decide on the installation type and proceed with the installation.

5.1.2 Install or upgrade Storage Manager on Microsoft Windows

1. Run the installer file - our version is SMIA-WS32-02.17.35.05.exe. The files unpack, as
shown in Figure 5-1.
Figure 5-1 Preparation
2. Select the language to display the license agreement, and click OK, Figure 5-2 on
page 95.
Note: The installation program will always use English - the selected locale only affects
the license agreement.
94
IBM System Storage DS3000: Introduction and Implementation Guide
Draft Document for Review August 30, 2007 12:59 am