Sansurfer - Configure Initiator Authentication - IBM DS3000 Introduction And Implementation Manual

Draft Document for Review August 30, 2007 12:59 am
Figure 16-55 SANsurfer - Configure initiator authentication
7. Enter the SANsurfer password and click OK.
8. In Figure 16-56, click the green plus sign beside the CHAP entries table to add a new line
in the table. Enter the IQN of the iSCSI initiator port to be configured in the Initiator Name
column. Enter the CHAP secret as it was defined on the DS3300 in Example 16-4 on
page 374 in the initiator Secret column.
Chapter 16. iSCSI configuration 1 - Windows 2003 with QLogic QMC4052 HBA
7065iSCSI_Config1.fm
375