Edit Port Alias - IBM DS3000 Introduction And Implementation Manual

Draft Document for Review August 30, 2007 12:59 am
name and a number starting with 0 (Figure 8-20). To edit this alias, highlight the port and
click Edit.
Figure 8-20 Ports specified
6. In Figure 8-21, you can change the alias to a more meaningful name for your
configuration, if desired. Click OK to accept the change, and repeat for all other ports.
Figure 8-21 Edit Port Alias
7. You may want to define an HBA port, that is currently not connected to your environment
and was therefore not detected. To do this click New on Figure 8-20. On Figure 8-22 you
can enter a WWN and unique port alias. Click Add.
7065Admin_Configure.fm
Chapter 8. Administration - Configure
147