IBM DS3000 Introduction And Implementation Manual page 405

Draft Document for Review August 30, 2007 12:59 am
Figure 16-53 SANsurfer - Logout from target
2. Enter the SANsurfer password and click OK.
3. Save the configuration and refresh the configuration as prompted (click Yes to accept the
configuration refresh). The configuration should now appear similar to Figure 16-54 on
page 374 with no sessions active for the chosen target.
Chapter 16. iSCSI configuration 1 - Windows 2003 with QLogic QMC4052 HBA
7065iSCSI_Config1.fm
373