Table of Contents
Advertisement
Figure 4. Slide box contents
Install the rear mounting bracket
Install the rear mounting bracket on the left rail from the front of the rack. (ref Figure 5)
Attention: You must install the rear mounting brackets of the rails before
installing the front mounting brackets.
There are two rails, left rail (marked with L) and right rail (marked with R). You
can install the rails into racks with square holes or round holes. Follow the steps
to install each rail onto the flanges.
Step 1 Fully slide the outer rail toward the rear of the rack.
© Copyright IBM Corporation 2020, 2021.
Customer Install Guide, Connector Node
24
Advertisement
Table of Contents
