Installing The Storage Subsystem Or Storage Enclosure In The Rack Cabinet - IBM DS3500 Quick Start Manual

Installing the storage subsystem or storage enclosure in the rack
cabinet
To install the storage subsystem, complete the following steps:
1. Read the safety information that comes with the storage subsystem or storage enclosure.
2. Slide the rear of the storage subsystem or expansion enclosure onto the support rails as shown for the
DS3512 and EXP3512 in Figure 9, and for the DS3524 and EXP3524 in Figure 10.
Figure 9. Positioning a DS3512 or EXP3512 in a rack
Note: The DS3524 and EXP3524 do not use the support rail alignment tabs.
Figure 10. Positioning a DS3524 or EXP3524 in a rack
Alignment tab
(both sides)
9