Configuration - Sartorius Combics CAW1P Operating Instructions Manual

Operating Design
k k
k k
34 Operating Instructions Combics Indicators

Configuration

Basic settings are made in the Menu mode by selecting the desired parameters.
These are divided into the following groups (menu level 1), menu structure see
page 126:
– Application parameters APPLIC.
– Function key FN-KEY
– Device parameters SETUP
– Device-specific information Info
– User language LANGUAG.
When used in legal metrology, not all parameters can be accessed. Only those
parameters that can be selected are displayed. Factory-set parameters are identified
by an "*" in the list starting on page 127.
Printing Parameter Settings
Access the Menu mode (see page 32)
t
Press the p key
t
The scope of the printout depends on the position in the setup. It may take several
seconds.
Language, setting
Example: Select the language "German." The factory setting for language is "English."
Menu: applic. / LANGuag .
e
Turn on the device.
t
While all segments are lit, briefly press the ) key.
t
y The first item in the main menu is shown: APPLic.
Press the k key until the LANGuag menu item appears for the language
...
t
setting.
)
Press the ) key to access the language setting sub-menu.
t
y The currently set language is displayed.
Press the k key until u.s. mode is displayed.
...
t
)
Press the ) key to save the selection.
t