Menu Structure - Sartorius Combics CAW1P Operating Instructions Manual

Menu Structure

Menu Structure
Overview of the complete menu structure; individual setting parameters are listed on the following pages.
The indicator only displays the menus that correspond to the available hardware.
Setting and selection applications (see page 141)
Applic.
Basic weighing function, Counting z , Neutral measurement znM, Animal weighing j, Weighing in percent
- Applic.1
% applications
Checkweighing + / – , Classification
- Applic.2
Net-total formulation R , Totalizing s applications
- Applic.3
Automatic taring: first weight tared
- aut.tare
Minimum load for automatic tare and printout
- min.tare
Automatic start of application
- aut.strt
Selective deleting with the
- CLER.CF
Tare function
- TARE.FNC
Factory settings for all applications
- Reset
Defines functions of the k key (see page 145)
fn-key
- off
- 2ND.UNIT
Adjusts device settings to user requirements (see page 146)
setup
Settings for weighing platform 1
- wp1
Settings for the RS-232 interface
- com1
Settings for the 2nd optional interface
- unicom
10,000e ADC setting
- com-wp
Universal input and digital IOs setting (optional)
- CTRL IO
Settings for barcode function
- Barcode
Printout settings
- print
Settings for additional functions
- UTILIT.
Time setting
- Time
Date setting
- Date
User password entry for locking the Setup menu
- U-CODE
only visible in Service mode; applications
- s-date
only visible in Service mode; serial number
- ser.no
only visible in Service mode; serial number
- model
only visible in Service mode;
- s-sqmin
Activates display or GMP-compliant printout
- sqmin
- ALIB.MEM
Displays device-specific information (see page 155)
info
Service date
- service
Indicator serial number
- term
Weighing platform 1 device data
- wp-1
Weighing platform 2 device data
- wp-2
FlexPrint settings
- flexinf
Alibi memory settings (optional)
- alib.mem
Language setting for display and printout (see page 155)
LANGUAG.
- deutsch
- english
- us.mode
- franc
- ital
- espanol
- codes
ADC configuration settings (see page 156)
ADC.CON
- VERIF.
- standard
140 Operating Instructions Combics Indicators
W
applications
key
C