Operation
Available Parameter Settings
Additional Functions
Printout (example)
94
Operating Instructions Combics Indicators
PROTOC. Protocol
HEADLIN.
QTY.1
INDIV. 1
COMPON.1
TOTAL 1
QTY.2
INDIV. 2
COMPON.2
TOTAL 2
gmp.prot
DAT/TIM
AUT.ONCE
FLEX.PRN
DEC.SEP.
ALIB.MEM
Restore factory default settings
RESET
Setting factory settings
–
The rows of the protocol list can be called up and activated individually.
Example: see under Configuration, menu item 7.6
–
The print selection set as active appears with the left selection bar on the
display, e.g. gross, tare, net.
Expand the printout: Press the ) key. The selection bar appears on the right
t
of the display.
Select print items: Press the k key
t
Save the desired print items: Press the ) key
t
Press the ( key: to switch to the active print selection. The selection bar
t
appears on the left. The required print item is set as active and appears in the
printout.
–
Print items can be deleted individually from the active printout selection:
Press and hold the ( key.
Save settings with the ) key and exit Setup: Press the ( key several times.
t
Printing the "Selection" and "List" Settings
LIST: Output of the current printout list
SELECT: Print currently selectable items
When the selection bar is in LIST or SELECT: Press the p key.
t
Indiv. Prt
List
====================
Net (N)
Gross (G#)
Tare
Tare (T2/PT2)
Piece count
====================
etc.
7
Header and ID header input
Quantity interface 1
Standard interface 1
Component interface 1
Result interface 1
Quantity interface 2
Standard interface 2
Component interface 2
Result interface 2
ISO/GMP
Date without time
Automatic printout after stability
Flex print
Decimal separator
Alibi memory
7.4
7.5
7.6
7.7
7.8
7.9
7.10
7.11
7.12
7.13
7.14
7.15
7.16
7.17
7.18
9
9.1