Cabling Diagram - Connection To A Pc - Sartorius Combics CAW1P Operating Instructions Manual

Getting Started
Getting Started
6
6
4
4
2
2
Features
3
16 Operating Instructions Combics Indicators
Operating Instructions Combics Complete Scales
PS/2 socket pin assignment on Combics 2
PS/2 socket pin assignment on Combics 2
Pin 1: Keyboard data (data interface cable)
Pin 1:
5
Pin 2: Not assigned
Pin 2:
5
3 Pin 3: GND (ground)
Pin 3:
3
Pin 4: 5V switched
1
Pin 4:
1
Pin 5: Keyboard clock
Pin 5:
Pin 6: Not assigned
Pin 6:
Connecting an IS Weighing Platform to a Combics 2
Connecting an IS Weighing Platform to a Combics 2
You can connect an IS weighing platform to WP2.
You can connect an IS weighing platform to WP2.
Features – IS weighing platforms process weighing data independently of the indicator.
– IS weighing platforms process weighing data independently of the indicator.
– Internal calibration/adjustment option
– Internal calibration/adjustment option
– IS...-0CE models: have a separate approval number, printed on a tag that is
– IS...-0CE models: have a separate approval number, printed on a tag that is
affixed to the cable.
affixed to the cable.
– Please observe the conditions described in the manual for the weighing platform
– Please observe the conditions described in the manual for the weighing platform
you connect.
you connect.

Cabling Diagram - Connection to a PC

Use the following cables to connect a PC to the indicator in accordance with the
Cabling Diagram - Connection to a PC
RS-232C/V24 standard (max. cable length 15 m):
Models CAW1P, CAW2P:
Use the following cables to connect a PC to the indicator in accordance with the
Models CAW1S, CAW2S:
RS-232C/V24 standard (max. cable length 15 m):
Models CAW1P, CAW2P:
Models CAW1S, CAW2S:
NOTE: This equipment has been tested and found to comply with the limits pursuant to part
15 of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with these instructions, may cause harmful interference
to radio communications. For information on the specific limits and class of this equipment,
please refer to the Declaration of Conformity. Depending on the particular class, you are either
required or requested to correct the interference. If you have a Class A digital device, you need
to comply with the FCC statement as follows: "Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense."
Keyboard data (data interface cable)
Not assigned
GND (ground)
5V switched
Keyboard clock
Not assigned
connecting cable 7357312
connecting cable YCC02-D9F6
connecting cable 7357312
connecting cable YCC02-D9F6
V24
V24