Configuration - Sartorius EC1XS Operating Instructions Manual

Configuration

Operating Menu Navigation
Purpose
You can configure the scale by choos-
ing from parameters options in the
Setup menu to adapt the scale to indi-
vidual requirements.
Features
The parameters are combined in the
following groups (highest menu level):
1 Scale functions
2 Application programs
3 Application parameters
5 Interface
6 Printout in weighing mode
7 Printouts from application programs
8 Extra functions
9 Reset (restore factory settings)
12 12
Factory Settings
Factory-set parameters are identified by
an "o" in the list on the following pages
("Operating Menu Overview").
Preparation
§ Switch off the scale: press the e
[On/Off/Standby] key
§ Switch the scale back on: press e
[On/Off/Standby]; while all segments
are lit: press the ) [Tare] key briefly
> Measured value/result line: 1 (1st menu
level)
$ To scroll through the items on one
menu level, press: ) [Tare]; after the
last item is reached, the first is dis-
played again
$ To confirm the highlighted item and
open the submenu (2nd menu level),
press p [Print]
$ To return to the next higher menu level,
press p [Print]
§ To confirm a new setting, press and
hold p [Print] (2 sec)
> "o" indicates the active setting
§ To save changes and exit the menu,
press and hold the ) [Tare] key (2
sec)
§ To exit without saving changes, press
e [On/Off/Standby]
> Restart the application